Tenda W3000R router WISP(wireless relay) settings

This article introduces the setting method of the Tengda W3000R router WISP(wireless relay). WISP is wireless WiFi signal relay, also known as wireless WAN. Its main function is to amplify another wireless router.The wireless WiFi signal on the router expands the coverage range of the wireless WiFi signal.

WISP(Wireless Relay) Applicable Environment

For example: the user has installed a wireless router in the living room, and has configured wireless WiFi, and can access the Internet normally; but due to the large area of the user’s place, searching in the bedroomWe can’t get the WiFi signal on the router in the living room; at this time, we can install a Tengda W3000R wireless router in the bedroom and establish a connection with the wireless router in the living room through the WISP function.Connect it, so that the wireless signal coverage in the bedroom will be very good.

Warm reminder:

(1) Before setting up the WISP function on the Tengda W3000R router, users need to know the security mode, channel, encryption rules, keys and other information on the superior wireless router. This isPrerequisites for configuring WISP.

(2) Prepare a network cable, connect one end to the LAN (1/2/3/4) interface of the Tengda W3000R router, and connect the other end of the network cable to the computer.

Step 1: Configure the computer IP

1. Right-click on Internet Neighbor and click on Properties”

XP网上邻居属性

2. Right-click on local connection and click on properties”

XP电脑本地连接属性

3. Double click on Internet Protocol (TCP/IP)”

xp系统下本地连接属性中选择tcp/ip

3. Select Automatically obtaining IP addresses and Automatically obtaining DNS server addresses and click OK.

xp系统下设置自动获取ip地址

For Windows 7/8 computer settings, please click to read the article:Method for setting dynamic IP address of computer

Step 2: Setting up WISP

1. Log in to the W3000R router setting interface: Run the browser on your computer, enter 192.168.0.1 in the browser’s address bar and press Enter to enter the default login password: admin Click OK.(If 192.168.0.1 cannot be opened, please read the article:Solution to the Tenda wireless router 192.168.0.1 that cannot be opened

腾达W3000R路由器登录设置界面

2. Click Advanced Settings”

进入腾达W3000R路由器高级设置

3. Click Advanced Settings WAN port setting mode to select: DHCP click OK.

配置腾达W3000R路由器WAN接口模式为DHCP

4. Click Wireless Settings Wireless Security Mode Select: WPA-PSK Set Password Click OK.

腾达W3000R路由器无线安全设置

5. Click Wireless Settings Wireless Bridge Mode Select: WISP Mode Click to open scanning and find the superior wireless router in the scanning resultsand click Connect. In the pop-up dialog box, click Confirm security mode, WPA encryption rules, and key must be consistent with that of the superior router.

腾达W3000R路由器上WISP设置

Step 3: Check whether the settings were successful

Click Advanced Settings running status to check the WAN port status. If it displays: Connected, the WISP mode on the Tengda W3000R router has been successfully configured, and the wireless device canTo connect to the Tengda W3000R router to go online.

腾达W3000R路由器上WISP连接成功

Related articles:

1、Tenda’s wireless router cannot be connected to the Internet after setting up

2、Tenda router limits WiFi speed 

3. How to set up the Tenda W3000R wireless router 

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注