Official repair address for TUDOR watches in Hangzhou [reasons why TUDOR watches run fast]

Hangzhou Tidu Watch official repair address [The reason why Tidu watches run fast]-Hangzhou watch maintenance. The inaccurate timing of the watch will not only affect our normal use, but also easily destroy a good mood. Although it is normal to say that a watch runs fast, because there is no such thing as a clock that is always accurate, whether it is a quartz watch or a mechanical watch. As long as the error is within a specified range, it is normal, but if it exceeds the range, watch friends will have to pay more attention. So what is the reason why the watch is running fast, and what should I do if I find that the watch is running fast? Let Xiaobian tell you below

What is the reason why the watch runs fast?

1. The balance between the balance wheel and the hairspring, especially the balance wheel. The balance wheel is very poor, which will cause the balance wheel to highlight superficial precision changes under a certain swing.

2. The effect of the magnetic field. After the hairspring is magnetized, the circle between the rings is only displayed when wearing. There is viscosity or a short loop. Especially on the facade, the hairspring will droop due to its own gravity. The shaking of the arm will intensify its radial movement, and the effect of magnetic energy is shown because of this.

3. Structural problems. Due to the gravity of the earth, the deviation between the horizontal position and the vertical position will produce a potential difference. The clockwork will be tightened to relaxed, and the torque will be unbalanced. In addition, due to the influence of external temperature, magnetic field, vibration, etc., the mechanical watch Even if the frequency is increased a little, it is impossible to achieve the accuracy of a quartz electronic watch.

4. The speed of a mechanical watch is mainly determined by the wobble frequency. Generally, the larger the wobble amplitude, the smaller the wobble frequency, and the smaller the wobble amplitude, the greater the wobble frequency. Generally, watches rely on retracting and retracting the hairspring to control the swing, which is the basic principle of adjusting speed. Making the spring that can be retracted and retracted longer will increase the swing amplitude, the swing frequency will decrease, and the watch will slow down; conversely, if the swing frequency becomes larger, the watch will become faster. Hangzhou Tidu Watch Official Repair Address [The Reason Why Tidu watches run fast]-Hangzhou Watch Maintenance

Generally speaking, mechanical watches (including automatic mechanical watches) are basically in line with the standard as long as they are full of strings and travel slowly no more than 30 seconds per day, and the speed is no more than 30 seconds. At the same time, the accuracy of mechanical watches when traveling is also related to the personal habit and location of wearing watches, which requires enough attention from friends.

What should I do if I find that my watch is running fast?

There are many parts inside a mechanical watch that are made of steel materials, such as hairsprings, large and small steel wheels, screws, bearings, and escape wheels, which are easily magnetized by magnets, magnetic fields, etc. The travel speed of a watch is controlled by the hairspring and balance wheel, and the hairspring is one of the most easily magnetized parts. After the watch comes into contact with the magnetic field, the hairspring is magnetized and will adhere together, which will change the swinging frequency of the balance wheel, and then change the running speed of the gear, and the watch will move faster. Those with mild symptoms can walk dozens of seconds faster a day. Those with severe symptoms can walk faster for several minutes or even hours. If you find that your watch is moving fast, you can find a compass to diagnose whether your watch is magnetized. Lay the compass flat on the table, hold the watch and quickly shake it back and forth above the compass at close range, and change the watch in several directions and try it a few more times. As long as the pointer moves, especially if the deflection is very strong, you can judge that the watch is magnetized. If the watch is magnetized, it is best to take it to the repair shop for demagnetization. cjq

The above is a brief introduction to the reasons why the watch runs fast. Xiaobian reminds you here that when maintaining your watch, do not let the watch come into contact with objects with strong magnetic fields. It is best to keep a distance of more than one meter. Don’t leave your watch in magnetic areas such as TVs, computers, radios, etc. Official repair address of Hangzhou Tidu Watch [The reason why Tidu watches run fast]-Hangzhou watch maintenance recommended Click: Hangzhou Tidu Repair Center-Yingwatch certified

 

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注