Official repair address for Baoqilai watches [What should I do if my Baoqilai watches are fogged]
Official repair address for Baoqilai watches [What to do if Baoqilai watches get fogged]-Beijing Watch Customer Service Center. In general, although mechanical watches are sealed, mechanical watches are composed of many parts and have very fine gaps at the joints of different parts. If the mechanical watch is used for a long time, the clearance will also increase. On rainy days, or when washing hands and washing clothes with a watch, water or steam can enter through these tiny gaps. At normal temperatures, it does not appear. If the temperature suddenly cools, the steam in the mechanical watch will condense into water droplets and adhere to the mirror surface. When encountering such problems, light will affect the perspective effect of the surface. When viewed from the outside, a layer of white fog will seriously affect the rusting of the moving parts of the mechanical watch, reduce the lubrication of the mechanical watch, affect the accuracy of the mechanical watch, and accelerate the aging of the mechanical watch. This problem needs to be dealt with or repaired in a timely manner. Now Xiaobian briefly introduces the following methods:
dehydratable dry
Most sealed packages we buy have a small bag marked “Do not use”. In fact, it is a desiccant that can maintain the drying effect of sealed packaging for a certain period of time. It is also feasible to use this method to remove fog from mechanical watches. First, prepare a pack of desiccant and an airtight container. The crown of the mechanical watch is also pulled out, and then prepare the container with the desiccant. The sealing time is related to the amount of desiccant. The more desiccant, the shorter the time.
baking
As we all know, the crown is used for timing and winding. Don’t forget, it is also an important reason for water entry into mechanical watches. Every time the watch is adjusted, the crown must be pulled out and there will be a certain gap. At this time, we also use this gap to remove water vapor from the mechanical watch. Pull the crown to first or second gear, wrap it in absorbent tissue or cloth, then use an incandescent bulb, or observe while baking in the scorching sun. The fog will be eliminated after about half an hour. Official repair address for Baoqilai watches [What to do if Baoqilai watches are fogged]-Beijing Watch Customer Service Center
Blow dry with fan
Hair dryers are a very common tool. They are simple to operate and can be plugged in. It is also feasible to use it to defog a mechanical watch. The method is as follows: Prepare a hair dryer, first fix the mechanical watch on the side. The back cover of the mechanical watch is usually made of stainless steel, and the crown still needs to be pulled out. After the hair dryer is powered on, adjust it to a low level (the temperature should not be too high, it will easily burn the internal parts of the mechanical movement, and the wind speed should not be too high), blow at the metal position, and use the thermal conductivity to increase the temperature in the movement and vaporize the water, and discharge along with the crown gap. This method can be reused to ensure that no water is removed from the movement. cjq
The above is a brief introduction to the method of fogging the watch. Xiaobian tells you that if the water in the mechanical watch is too serious, the hair above cannot be completely removed. Then you need to send the watch to after-sales sales or repair center for processing, so as to avoid oxidation and corrosion of the internal movement parts of the mechanical watch, accelerate the aging of the mechanical watch and reduce its life. Official repair address of Baoqilai watches [What to do if Baoqilai watches are fogged]-Beijing Watch Customer Service Center Recommended Click: Beijing Baoqilai Repair Center-Yingbiao has been certified