Shanghai Breguet Repair Center [Breguet watches handle water from watches]
In daily life, watches will inevitably encounter problems, and the problem of water entering is very troublesome. Sometimes it is far away from the after-sales of watches, and it is very troublesome at this time, because the watch cannot be left unattended for a long time when water enters. At this time, it is very necessary to master emergency treatment methods yourself. The following small series brings you a few simple and effective ways to deal with water-soaked watches, which will facilitate us to solve sudden problems with watches.
There are several levels of water in the watch:
1. Fog occurs in the watch glass, and sometimes it may or may not, especially when the temperature difference is large. Shanghai Breguet Repair Center [Breguet watches handle water from watches]-Watch Service Center
2. There are condensation of water inside the watch glass.
3. A large number of water droplets can be seen on the watch glass and dial.
There are several properties of the water that enters the watch:
1. Sea water
2. Drinks or beer
3. Tap water or rainwater
4. Purified water or distilled water
5. Cosmetics or chemical reagents or potions
Simple treatment method after water enters the watch:
Method 1: Put the cover inward and the bottom shell outward, and wear it on the wrist upside down. The moisture will be eliminated after two hours. If the water is serious, it is best to immediately send it to the meter shop to wipe oil and remove the moisture from the movement to avoid rusting of parts. Shanghai Breguet Repair Center [Breguet watches handle water from watches]-Watch Service Center
Method 2: If a mechanical watch is exposed to moisture, you can wrap the watch tightly with several layers of toilet paper or moisture-absorbing flannel, place it about 15 centimeters near a 40-watt light bulb, and bake it for about 30 minutes. The water vapor in the watch can dissipate. Never place the watch’s cover close to the fire and bake it directly to avoid being deformed by heat.
Method 3: Use granular silica gel and place it into a closed container together with the watch that has accumulated water. After a few hours, take out the watch, and the accumulated water will dissipate. This method is simple and economical, and does not damage the accuracy and life of the watch. Silica gel that has absorbed water repeatedly can be dried at 120 ° C for several hours. Its water absorption capacity can be regenerated and it can be used frequently and repeatedly. cjq
The above is a brief introduction to the treatment of water entering the watch. Xiaobian reminds you that you should pay attention to the protection of the watch in daily life and avoid direct contact between the watch and water. Even water-resistant watches should avoid letting the watch soak in water. It is best to check it regularly to avoid serious damage to the internal movement parts due to time delays. Shanghai Breguet Repair Center [Breguet watches handle water inflow in watches]-Watch service center details click: Shanghai Breguet Repair Center-Yingwatch certified