Shanghai Baopin watches specializes in [reasons for the color change of Baopin watch dial]

If people don’t maintain it when wearing it in normal times, it is easy to cause the problem of discoloration of the watch dial. There are point-like discolouration and patchy discolouration. This situation is also called “pancolouring”. The proportion is higher in the case of old watches. So what are the reasons for the discoloration and aging of the dial? Let Xiao Bian introduce you to the reasons why the watch dial changes color and how to maintain it daily.

1. Production reasons

This happened 30 years ago. There seemed to be more cases where the dial of watches changed color. This was probably related to the production process at that time. The base of the dial was all brass, and then the surface was plated with gold or silver, and finally it was sprayed with cover lacquer. There may be some acidic solvent residue, which will most likely cause the dial to change color in the future. Shanghai Baopin watch repair [Reason for the color change of Baopin watch dial]-Watch Service Center

2. Human reasons

1. When the watch is placed or exposed to sunlight for a long time, various rays in the sunlight will slowly change color, as will exquisite things.

2. When the watch is soaked in water or has been wetted for a long time, the watch case is not tightly sealed, and external moisture and moisture penetrate into the watch, which can easily induce the dial to change color, or the dial cover polish peeling off, which is characterized by occurring at the edge of the dial. There are more.

3. For watches that have not been collected for a long time, if there is a night light hand, it depends on the nature of the material used for the night light. Generally, you should be extra careful with old watches. The discolored parts of the dial often happen to be in the night light of the watch and the minute hand. corresponding position.

4. The watch is exposed to radiation or radioactive substances. Radiation will be used in medical treatment and certain industrial production. This is the most powerful. It can change the color of something in a short period of time.

How to maintain the watch dial

1. Daily use: Pay attention to waterproof; at the same time, pay attention to the protection of the watch and minimize long-term exposure to direct sunlight; at the same time, take off the watch in advance before coming into contact with medical treatment instruments and industrial equipment with radiation.

2. Cleaning treatment: During cleaning, the spots and flashing colors on the dial can be wiped with flannel, let alone wiped hard, otherwise the dial will be covered with copper and affect the appearance. The grease on the back of the dial can be wiped with a flannel dipped in some gasoline. Clean dials should be placed face up, avoid mixing them with other parts, and then cover them with a dust cover to protect it. cjq

The above is a brief introduction to the reasons why the watch changes color. Xiaobian tells you that today’s watch dial will not turn yellow easily like it was back then. Most of the reasons for yellowing today are caused by people’s lack of attention to maintenance in their daily life., so everyone must remember to maintain their favorite watch. Shanghai Baopin watch repair [Reason for the color change of Baopin watch dial]-Watch service center: Shanghai Baopin Repair Center-Yingwatch has been certified

 

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注