Haier water heater does not display and does not heat after it is powered on. What happens when the water heater does not heat up?
Water heaters are already a must-have appliance for every household. When we wanted to take a bath, we suddenly found that the water in the water heater at home was cold. When we looked up, we found that the water heater at home was not heating. What is the situation? Let’s find out why the numbers do not show or heat after Haier’s water heater is powered on:
1Damage to heating rod
You know, the life span of our water heaters is about5–10During this period, our heating rods can still be sensitively heated, but after time, our heating rods will age and wear out. At this time, the heating rods will not be heated properly. In this case, we need to repair the heating rods of our water heater. If the wear and aging situation is very serious, the heating rods need to be replaced here. If the heating rods are not replaced, some safety problems may arise.
2The switch is faulty
If the water heater has not been heated for a long time, we need to consider whether there is a problem with our switch socket plug, which causes our water heater to not heat normally. At this time, we can ask a professional teacher to check the wiring of our water heater. At the same time, we must also check whether the internal wiring of our water heater is normal. If the wiring is abnormal, it will cause our water heater to not heat normally.
3Internal parts of the water heater are aging or damaged
When our water heater is used for a period of time, wear and tear will occur, and after a long time, the internal parts will be damaged. At this time, it will lead to the problem that our water heater cannot be heated although it is plugged in. In this case, we need to find a professional master to inspect and repair our water heater to see if it is due to internal parts problems that cause our water heater to be unable to heat.
When we encounter the problem that the water heater cannot heat at home, we must solve it in time to avoid short-circuit voltage stabilization. At the same time, if we cannot check it ourselves, we can find a professional to carry out maintenance.