How to restore the factory settings of the 360 router?
This article describes the operation method of restoring the factory settings of the 360 router. Generally, only when the management password of the 360 router is forgotten or the settings in the router are confused will the 360 router need to be restored to the factory settings.
There are 2 ways to restore the 360 router settings:1. Restore factory settings on the settings interface;2. Press and hold the reset button to restore factory settings。The specific operating steps of these two methods will be introduced in detail at the next annual meeting:
Method 1: Restore factory settings in the settings interface
1. Please enter in your browser:luyou.360.cn Or 192.168.0.1 and press the Enter button-enter the “Management Password” to log in. (If you cannot open the settings page after entering luyou.360P1.cn, please click to read the tutorial:Solutions to the luyou.360.cn settings page that cannot be opened)
Warm reminder:
(1) The “management password” of the 360 router is the WiFi password by default. If you cannot log in with the WiFi password, it means that the WiFi password was not set as the management password at the same time when setting it for the first time. The management password was set separately.
(2) If you forget the separately set “management password”, you can only use the content described in Method 2 to restore the 360 router to the factory settings!
2. Click “Route Settings”-“Restore Factory Settings”
3. Click “Restore Factory Settings”
Questions to note:
There is an option to “Save Configuration Information” here. After being turned on, information such as Internet settings, wireless WiFi settings, and management passwords in the 360 router will be saved. If you turn off the “Save Configuration Information” option, all configuration information in the 360 router will be cleared. Please choose whether to turn it on according to your actual needs.
Method 2: Press and hold the reset button to restore the factory settings
On the body of the 360 router, there is a reset button:RESET, as shown in the following figure. With the power plugged in, use pointed objects such as toothpicks and pen tips toKeep pressing and holding the RESET button without letting go。Then pay attention to the lights on the 0 router,When all indicators go out and flash again, indicating that the factory settings were restored successfully, and the reset button can be released at this time.
Questions to note:
(1)”Method 1: Restore factory settings in the settings interface”. The user must know the management password and be able to successfully log in to the settings interface of the 360 router to achieve this.
(2) If you forget the management password and cannot log in to the setting interface of the 360 router, you can only use the content described in “Method 2: Press and hold the reset button to restore factory settings”.
(3) After restoring the factory settings, the default setting website of the 360 router is: luyou.360.cn or 192.168.0.1; there is no login password; the WiFi password is empty, so you can connect directly.
(4) Pressing the reset button to restore the factory settings will clear all configuration information in the 360 router. After restoring the factory settings, you need to reset the 360 router for networking, reset the WiFi name and password, and reset the management password.
The above is the operation method for restoring the factory settings of the 360 router. If there is anything you don’t understand, it is recommended to read the above article several times. If the final problem is still unresolved, you can leave a message at the end of the article, and the technicians of the 192 router will answer your questions in a timely manner.
Related articles:
360 router setup steps
What is the 360 router management password?
The 360 router is set up and the solution is not able to access the Internet
What is the 360 router management password?
How to set up a wireless network on a 360 router?