How to set up a 360 home firewall router computer?

In this article, we will give you a detailed introduction to how to use a computer to set up a 360 home firewall router to access the Internet. Hong Ge will give a demonstration below.

Note:

(1) For the 360 home firewall router that has been set up, it is recommended to restore it to the factory settings, and then follow the steps below to set up Internet access. For methods to restore factory settings, you can refer to the following article:

How to restore the factory settings of the 360 home firewall router?

(2) You can also use your mobile phone and 360 Home Firewall APP to set up a 360 Home Firewall router to access the Internet. Brother Hong wrote a separate article to introduce these two setting methods. Please click the article link below to view them.

How to set up a 360 home firewall router mobile phone?

How to set up the 360 Home Firewall Router APP?

Setting steps:

1. First of all, you need to connect your 360 home firewall router, optical cat/broadband network cable, and computer. The correct connection method is as follows:

The network cable connected from Guangmao’s network port (LAN port) must be connected to the WAN port of the 360 home firewall router. If your broadband does not use optical cats, you should connect your household broadband network cable and wall network port to the WAN port of the 360 home firewall router.

Then use another network cable to connect your computer to any LAN interface of the 360 Home Firewall Router. The connection diagram is as follows:

路由器正确连接示意图

Note:

For the 360 home firewall router that supports WAN/LAN adaptation, please ignore the above content, because its network port can be connected at will, and you don’t have to worry about wrong network cable connection.

2. Enter in your computer’s browserihome.360.cn, you can open the settings page of the 360 Home Firewall Router. Then click “Set a new firewall”, as shown in the following figure.

电脑设置360家庭防火墙路由器 1

Note:

(1) If you enter ihome.360.cn in your browser, you cannot open the settings page of the 360 home firewall router. Please read the following article carefully to see how to solve this problem.

What if ihome.360.cn cannot be opened?

(2) If you are using a 360 home firewall router to replace your old router at home, you can click “Transfer configuration from old router”。Then connect the WAN port of the 360 home firewall router to the WAN port of the old router, and click Start Transfer after connecting.

After transferring the configuration from the old router, be sure to connect the WAN port of the 360 home firewall router to the LAN port (network port)/broadband network cable/wall network port of Guangmao, otherwise you will not be able to access the Internet.

3. Next, the firewall will automatically detect the broadband Internet access method. Please set the Internet access parameters based on the detection results.

(1) If it is detected that the Internet access method is “Broadband PPPoE“, you need to fill in the broadband account number and broadband password provided by the operator, and click” Next “after completing, as shown in the figure below.

电脑设置360家庭防火墙路由器2

(2) If it is detected that the Internet access method is “DHCP Internet Access”, there is no need to set Internet access parameters and will directly jump to the wireless settings page.

(3) If it is detected that the Internet access method is “static IP Internet access”, you need to fill in the IP address, subnet mask, gateway, preferred DNS, and alternate DNS provided by the operator, as shown in the following figure.

4. Set the wireless name and password (wifi name and password) of the 360 home firewall router, as shown in the following figure.

电脑设置360家庭防火墙路由器3

Note:

The system will automatically use the wifi password you set as the administrator password. After opening the ihome.360.cn login page, enter the wifi password set here to log in.

5. At this point, the 360 Home Firewall Router has been configured to access the Internet, and the system will automatically restart. After the restart is completed, you can connect to it to access the Internet.

电脑设置360家庭防火墙路由器4

Supplementary explanation:

After completing all the setting steps, if your computer or mobile phone is connected to the 360 Home Firewall Router, you cannot access the Internet. This problem may be caused by several reasons such as broadband failure, setting error, and router damage. It is recommended to read the following article to see how to solve it.

What should I do if the 360 home firewall router is not connected to the Internet?

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注