How to set up the 360 router to access the Internet after it is reset?

Question:How to set up the 360 router to access the Internet after it is reset?

Answer:After resetting the 360 router, all original configuration parameters will be deleted, resulting in the router being unable to connect to the Internet. At this time, you must log in to the settings page of this 360 router, reset the Internet access parameters, wifi name and password, and you can access the Internet after completing the settings.

Warm reminder:

After the 360 router is reset, you can use three methods: computer, mobile phone, and 360 Home Firewall APP to set up Internet access. Due to the limitation of the article space, the following Hongge only demonstrates how to set up the 360 router to access the Internet in the mobile browser. For the other two settings, please refer to the tutorial:

360 home firewall router computer settings to access the Internet

360 Home Firewall Router APP Set up Internet access

360路由器
360 router

Setting steps:

1. Use a network cable, one end of which is connected to the WAN port of the 360 home firewall router, and the other end of the network cable is connected to the LAN port (network port) of Guangmao. If broadband does not use optical cats, you need to connect the broadband network cable and wall network port to the WAN port of the 360 home firewall router. If a computer needs to access the Internet, use another network cable to connect the computer to the LAN interface of the 360 Home Firewall Router.

Note:

For the 360 home firewall router that supports WAN/LAN adaptation, please ignore the above content, because its network port can be connected at will, and you don’t have to worry about wrong network cable connection.

路由器正确连接示意图

2. It is recommended to temporarily turn off the mobile data Internet access on the mobile phone, and then connect the mobile phone to 360WiFi-XXXXXX or 360WiFi-XXXXX-5G.

手机连接360家庭防火墙路由器的默认wifi

Note:

(1) You can view the default WiFi name at the bottom of your 360 home firewall router.

(2) After the mobile phone is connected to the default wifi of the 360 home firewall router, the mobile phone cannot access the Internet. This is normal, so don’t worry. Because when setting up a router with a mobile phone, you don’t need your mobile phone to be online, novices and small white users should keep this in mind.

3. Type ihome.360.cn in the browser of your mobile phone to open the settings page of the 360 Home Firewall Router. The page will be prompted to download the 360 Home Firewall APP. Don’t worry about it here. Click “Set up Internet Access” below, as shown in the following figure.

手机设置360家庭防火墙路由器上网1

Note:

If you type ihome.360.cn in your browser, you cannot enter the settings page of the 360 Home Firewall Router. Please read the following article carefully to see the corresponding solutions.

What should I do if my mobile phone cannot be opened?

4. Click “Set a New Firewall”.

手机设置360家庭防火墙路由器上网2

Note:

If the old router can access the Internet normally, you can click “Transfer Configuration from Old Router”, then connect the WAN ports of the two routers with a network cable, and click the “Start Transfer” button after completing.

5. Next, the router will automatically detect the broadband Internet access method. If it detects “Broadband PPPoE”, then you need to fill in the broadband account number and broadband password provided by the operator, as shown in the following figure.

手机设置360家庭防火墙路由器上网3

If it is detected that the Internet access method is “DHCP”, there is no need to configure Internet access parameters, and you will directly enter the Wireless Settings (WiFi Settings) page.

If it is detected that the Internet access method is “static IP”, you need to fill in the IP address, subnet mask, default gateway, primary DNS, and backup DNS provided by the operator, as shown in the following figure.

手机设置360家庭防火墙路由器上网3-2

6. Set the wireless network name and wireless password, and click the “Save for Effective” button after completing it.

手机设置360家庭防火墙路由器上网4

7. At this point, the 360 home firewall router is set up, the system will automatically restart, and some configuration parameters will appear on the page, as shown in the following figure.

手机设置360家庭防火墙路由器上网5

8. After the router is restarted, the mobile phone is connected to the newly set wifi signal, and you can surf the Internet after connecting.

手机连接新设置的wifi

Important:

After following the appeal steps, if your computer or mobile phone cannot access the Internet after being connected to the 360 Home Firewall Router, it may be a wrong setting or a broadband failure. It is recommended to read the following article to see the solution.

What should I do if the 360 home firewall router is not connected to the Internet?

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注