How to set up Internet access on a 360t5g router mobile phone?

ask: How to set up a 360T5G router on my mobile phone to access the Internet?

Answer:Connect your phone to the 360T5G router wifi network, then log in to its settings interface in the browser, and follow the prompts on the page step by step to set up your 360T5G router to access the Internet. The following is a demonstration.

Note:

(1) For a 360T5G router that has been set up/used, it is recommended to restore it to the factory settings first, and then follow the steps below to set up Internet access. For the steps to restore factory settings, please refer to the following article.

How to restore the factory settings of a 360T5G router?

(2) If you have a computer, you can also use a computer to set up a 360T5G router to access the Internet. For setting steps, please refer to the article:

How to set up a 360T5G router? (Computer)

Setting steps:

1. Connect the optical cat/broadband network cable in your home to any network port on the 360T5G router; if you have a computer, use the network cable to connect to one of the remaining network ports on the 360T5G router.

Warm reminder:

The 360T5G router supports WAN/LAN adaptation. The router will automatically use the interface connecting the optical cat/broadband network cable as the WAN port, and the remaining network ports as the LAN port. So, don’t worry about connection errors, the network port on it can be connected at will.

2. In the sticker on the back of the 360T5G router, check the default wifi name, wifi password, login name, login password and other parameters, as shown in the following figure.

360 T5G路由器背面贴纸

Note:

The default wifi password and login password of each 360T5G router are different. Everyone must check and confirm it yourself.

3. Connect your phone to the default wifi network on your 360T5G router.

手机连接到360 T5G路由器的默认wifi网络
Connect the phone to the default wifi network of the 360T5G router

4. Enter wififi.cmcc or 192.168.10.1 in the browser of your mobile phone to open the login page of the 360T5G router. Enter the username and password you viewed in step 2, and log in to its settings interface, as shown in the following figure.

手机打开360 T5G路由器的登录页面

5. The router will automatically detect the broadband Internet access method, wait a few seconds, and make corresponding settings based on the detection results.

(1) If “Broadband PPPoE” is detected, you need to fill in the broadband account number and broadband password provided by the operator, as shown in the following figure.

手机设置360 T5G路由器的上网参数

(2) If “dynamic IP Internet access” is detected, it will directly enter the Wi-Fi settings page without setting Internet access parameters.

(3) If “static IP Internet access” is detected, you need to fill in the IP address, subnet mask, gateway, preferred DNS server, backup DNS server, etc. provided by the operator.

手机打开360 T5G路由器的登录页面

6. Set the router’s WiFi name, WiFi password, and administrator password; here Hongge suggests checking the option “Set the management password and wifi password to the same” and then click “Next”.

设置360 T5G路由器的wifi名称、wifi密码、管理员密码

7. The settings are complete and you can start surfing the Internet.

设置完成

8. After completing the settings, the default wifi name will disappear, and the phone needs to connect to the newly set wifi. After connecting, you can surf the Internet.

手机连接到新设置的wifi

Supplementary explanation:

If your computer or mobile phone cannot access the Internet after completing all the setting steps, you can read the following article carefully to see the corresponding solution after connecting to the 360T5G router.

What should I do if the 360T5G router is connected to the Internet?

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注