How does a 360 router enter the settings page?

Question:How does a 360 router enter the settings page?

Answer:In the browser of your computer or mobile phone, enter the login address of the 360 router to enter its settings page. The following is a detailed demonstration.

1. The computer/mobile phone must be connected to your 360 router’s network and be able to communicate with the 360 router, otherwise it will not be able to enter its settings page.

Note:

(1) If it is a desktop computer, you must use a network cable to connect it to the LAN interface or WAN/LAN interface on the 360 router; if it is a notebook computer, you can connect it to the wifi network of the 360 router.

When using a mobile phone to set up a 360 router, the mobile phone must be connected to the wifi network of the 360 router.

(2) When setting up a 0 router with a computer/mobile phone,No need for a computer/mobile phone to be online, as long as your computer/mobile phone is connected to the network of the 360 router, you can set it up.

2. View the login address information on the sticker on the back of the 360 router.

360路由器怎么进入设置页面?

360路由器怎么进入设置页面?

Note:

The login addresses of different models of 360 routers may be different. There are also 360 routers customized by operators, whose login addresses are different from ordinary 360 routers. Therefore, everyone must check it on the label on the back of your 360 router.

3. Enter the login address you viewed in the previous step at the location where the URL is displayed in the browser, and you can enter the settings page of the 360 router.

If it is a 360 router that has been set up, it will enter the login page; at this time, you must enter the correct administrator password (login password) to enter the settings interface.

360路由器怎么进入设置页面?

If this is the first time to set up (reset after restoring factory settings), you will enter the Settings Wizard page. Please follow the prompts on the page.

360路由器怎么进入设置页面?

Supplementary explanation:

If you cannot enter the login address in the browser of your computer/mobile phone, you cannot enter the settings page (login page) of the 360 router; this problem is usually caused by your incorrect operation. You can read the following article to see the solution.

What should I do if the 360 router login website cannot be entered?

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注