360 Router Mobile Phone Setup Tutorial
With the 360 wireless router, you can use your computer to set up Internet access, or you can use your mobile phone to set up Internet access. Considering that some users do not have computers at home, the following is a detailed introduction to how to use a mobile phone to set up a 360 router to access the Internet.
Note:
For a 360 router that has been set up (used), it is recommended to restore it to the factory settings first, and then follow the following method to set up Internet access. For methods to restore factory settings, you can refer to the following article:
How to restore the factory settings of the 360 router?
Setting steps:
1. First of all, you need to connect your 360 router to the optical cat (broadband network cable); please check the information displayed below the 360 router’s network port and connect according to the information displayed.
If the display is “WAN/LAN“; This means that the network cable interface can be connected at will, and the router will automatically use the interface connected to the optical cat (broadband network cable) as the WAN port and the other interface as the LAN port.
If WAN and LAN or WAN and 1, 2, 3 are displayed. In this case, be sure to ensure that the WAN port is connected to the optical cat (broadband network cable) and the LAN port is connected to the computer.
2. On the sticker on the back of your 360 router, check the login address and default wifi name.
Warm reminder:
Different models of 360 routers may have different login addresses; when setting up, it is best to view and confirm the login addresses on the back of your 360 router.
3. Connect your phone to the default wifi network of the 360 router so that your phone can set it up after connecting.
Note:
When setting up a router on a mobile phone, it does not need to be in Internet access; as long as the mobile phone is connected to the router’s wifi network, it can be set up. This knowledge related to wireless local area network communication technology will not be introduced here; for information and small white users, just keep this in mind.
4. Enter the login address you viewed in step 2 in your mobile phone’s browser, enter the settings page of the 360 router, and then follow the prompts on the page.
5. Next, the 360 router will automatically detect the broadband Internet access method. Please set Internet access parameters based on the detection results.
(1) If it is detected that the Internet access method is “Broadband PPPoE”, you need to fill in the broadband account number and broadband password provided by the operator, and click “Next” after completing, as shown in the following figure.
(2) If it is detected that the Internet access method is “DHCP Internet Access”, there is no need to set Internet access parameters and will directly jump to the wireless settings page.
(3) If it is detected that the Internet access method is “static IP Internet access”, you need to fill in the IP address, subnet mask, gateway, preferred DNS, and alternate DNS provided by the operator, as shown in the following figure.
6. Follow the prompts on the page to set the wireless name and password (wifi name and password) of your 360 router, as shown in the following figure.
7. At this point, the 360 router has been configured to access the Internet and the system will automatically restart.
8. When your 360 router is restarted, your phone will be connected to the newly set wifi network, and you can surf the Internet after connecting.
Supplementary explanation:
After completing all the setting steps, if your computer or mobile phone is connected to the 360 router, you cannot access the Internet. This problem may be caused by several reasons such as broadband failure, setting error, and router damage. It is recommended to read the following article to see how to solve it.
What should I do if the 360 router is not connected to the Internet?