How to upgrade Tenda wireless router?

precautions

1. Use a network cable to connect the computer and the Tengda wireless router. Do not use wireless connection; ensure the stability of the router’s power supply. Do not power off during the upgrade process, otherwise the router will be unusable.

2. Check the router’s model and software version information, and go to the official website to check whether there are upgrade files for this model. The upgrade files must be downloaded correctly. Wrong upgrade files will make the router unable to use normally. Click to enter:Tengda wireless router upgrade file download page

3. The general upgrade is to improve the Tengda wireless router’s support for certain special environments and applications. If your Tengda router is in normal use, you are not recommended to upgrade the product!

upgrade method

1. Device connection

One end of the network cable is connected to the computer, and the other end is connected to any LAN button of the Tenda router. See the following figure for the connection method:

tenda腾达无线路由器与电脑连接

2. Check the software version

1. Enter the management address of the router in the browser: 192.168.0.1 Press the Enter key, enter the password admin in the page you jump to, and click “OK”.(If 192.168.0.1 cannot be opened, please read the article:Solution to the Tenda wireless router 192.168.0.1 that cannot be opened

tenda腾达无线路由器登录

2. Click “Advanced Settings”

tenda腾达无线路由器高级设置

3. Click “System Settings”-“Upgrade”-“Current System Version”, which is the current software version information of the router. According to the software instructions, determine whether the current system version of the router can use the upgraded software you downloaded.

tenda腾达无线路由器软件版本信息

3. Upgrade router software

1. Click “Browse”-select the correct upgrade file (upgrade software downloaded from the official website must be extracted before it can be used)-“Upgrade”

tenda腾达无线路由器升级

2. After the upgrade is completed, the router will enter an automatic restart state

tenda腾达无线路由器升级后重启

4. Check whether the upgrade was successful

After the upgrade is completed, refer to step 2 to check whether the current system version of the router has changed. If it has changed, it proves that the upgrade has been successful!

Related articles:

1. Tenda wireless router cannot be connected to the Internet after setting up

2. How to check if there is anyone surfing the Internet on the Tengda wireless router?

3、Tenda wireless router anti-rubbing network settings

4. Setting method for Tengda Router to limit the network speed

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注