Tenda F323 wireless router settings

This article introduces the installation and Internet setting method of the Tenda F323 wireless router. The Tenda F323 is a wireless router designed to meet the needs of families for wireless shared Internet access. It supportsWPA/WPA2-PSK hybrid encryption can effectively protect wireless network security; at the same time, the F323 router also supports WISP universal relay mode, which can easily expand wireless networks

腾达F323无线路由器

A brand new Tengda F323 wireless router requires the following three configuration steps from the installation of the device to the completion of Internet access:1. Install the router;2. Set up the computer IP;3. Set up F323router

Step 1: Install the router

1. Internet access through telephone line:Users need to be prepared2 piecesNetwork cable, one network cable is used to connect the ADSL Modem to the Tengda F323 wireless routerWANInterface; another network cable is used to connectcomputer andTengda F323The router’s LAN interface (any of 1/2/3/4 will work).

电话线或者光钎上网时路由器的正确安装方法

2. Optical diamond access:Users need to be prepared2 piecesNetwork cables, one of which is used to connect Guangmao to the Tengda F323 routerWANInterface, another network cable is used to connect the computer to the Tengda F323The router’s LAN interface (any of 1/2/3/4 will work).

光钎上网时路由器的安装方法

3. Internet access to the home through the Internet cable: Users need to prepare1 pieceNetwork cable, first plug the network cable provided by the broadband operator to the user’s home into the network of the Tengda F323 router.WANInterface, and then put the prepared oneInternet cable, connected to the computer at one end and connected to the other endTengda F323The router’s LAN interface (any of 1/2/3/4 will work).

网线入户上网时路由器安装方法

Step 2: Set the computer IP

to configureTengda F323Wireless router, or later need to pass throughTengda F323When routers come to the Internet, they need to configure the IP address on the computer to automatically obtain (dynamic IP) addresses. This article takes the Windows XP system as an example to introduce it. For Windows 7/8 users, please read the article:Method for setting dynamic IP address of computer

1. Right-click on Internet Neighbor and click on Properties”

XP网上邻居属性

2. Right-click on local connection and click on properties”

XP电脑本地连接属性

3. Double click on Internet Protocol (TCP/IP)”

xp系统下本地连接属性中选择tcp/ip

3. Select Automatically obtaining IP addresses and Automatically obtaining DNS server addresses and click OK.

xp系统下设置自动获取ip地址

Step 3: Set up the F323 router

ADSL(PPPOE) dial-up Internet settings

ADSL(PPPOE) dial-up Internet access: After being suitable for broadband, the broadband operator provides a broadband username and broadband password. When the computer connects to Modem (optical cat) to access the Internet, it needs to calculateUsers on board who access the Internet through a broadband connection.

1. Enter in the browser: 192.168.0.1 Press the Enter key to select ADSL dialing in the page to which you jump, enter the broadband account number and password, click Confirm andBut.(If 192.168.0.1 cannot be opened, please read the article:Solution to the Tenda wireless router 192.168.0.1 that cannot be opened

腾达F323路由器上ADSL拨号上网设置

2. Click Advanced Settings Running Status. If the WAN port status shows: Connected, it means that ADSL dial-up Internet access on the Tengda F323 router has been successfully set up.

腾达F323路由器上ADSL连接状态

Warm reminder:After the ADSL configuration on the F323 router is successfully completed, the computer willNo longer need to click on the broadband connection to surf the Internet, you can access the Internet directly after turning on the phone; if there are otherIf the computer needs to surf the Internet, connect the computer directly to any idle interface of router 1234. Please refer to step 2 to change the local connection to automatically obtain IP. There is no need to configure the router.

Fixed (static) IP Internet access settings

Fixed (static) IP Internet access:After being suitable for broadband services, the broadband operator provides a network cable to the user’s home and provides IP address, gateway, subnet mask, and DNS services.User use of the server address.

1. Enter in the browser: 192.168.0.1 Press the Enter key to select advanced settings on the page you jump to.

进入腾达F323路由器的高级设置

2. Click Advanced Settings Internet Settings Internet Access Method to select: Static IP and fill in the IP address, subnet mask, and“Click OK for gateway and DNS server.

腾达F323路由器上静态IP地址上网设置

3. Click MAC Clone to manually clone MAC address to determine.

腾达F323路由器上MAC地址克隆设置

Automatically (dynamically) obtain Internet settings

Automatic (dynamic) access to Internet: Suitable for connecting the Tengda F323 router to a router that can connect the Internet with a network cable. No broadband account and password are required, and no broadband transportation is required.IP address information provided by the vendor; as long as the router connected to the F323 router can access the Internet.

1. Enter in the browser: 192.168.0.1 Press the Enter key and select the automatically obtained click confirmation in the page you jumped to.

腾达F323路由器上动态获取IP上网设置

2. Click Advanced Settings Running Status If the WAN port status shows: Connected, it means that automatic (dynamic) access to Internet on the Tengda F323 routerSetup successfully.

腾达F323路由器上动态获取IP设置的连接状态

Related articles:

1、Tenda’s wireless router cannot be connected to the Internet after setting up

2、Tenda router limits WiFi speed 

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注