Tengda W3002R wireless router wireless WAN function (WISP) settings

This article introduces the wireless WAN settings in Tenda W3002R wireless router relay WiFi. The wireless WAN settings (WISP) function are provided in the Tenda series of wireless routers; in fact, this function is similar to the wireless WDS bridging function, both extend the wireless WiFi signal of the front-end (another) wireless router so that the wireless signal can cover a wider range.

Friendship explanation:

1. Before setting up a WISP, you must know the security mode, channel, encryption rules, and key of the superior WIFI signal (this is very important!). Otherwise, setting up the Wireless WAN Feature (WISP) cannot be completed.

2. Find a network cable, connect one end to the computer and the other end to any interface of the router 1/2/3/4

Step 1: Configure the computer IP

Before configuring the Tengda W3002R wireless router, you need to configure the IP address of your computer to be automatically acquired (dynamic IP address), as shown in the following figure: . Can’t configure it? Please click to read the article:Method for setting dynamic IP address of computer

电脑自动获取IP地址设置

Step 2: Configure WISP

1. Login setting interface: Enter in the browser: 192.168.0.1 Press the Enter key to enter the default password in the page you jump to: admin Click OK.(If 192.168.0.1 cannot be opened, please read the article:Solution to the Tenda wireless router 192.168.0.1 that cannot be opened

腾达W3002R无线路由器登录

2. Click Advanced Settings.

进入腾达W3002R路由器高级设置界面

3. Click the WAN port setting mode to select: DHCP and click OK.

腾达W3002R路由器WAN口模式选择为DHCP

4. Wireless Settings: Click Wireless Settings Wireless Security Security Mode Select: WPA-PSK Set Password Click OK.

腾达W3002R路由器无线安全设置

5. Scan the signal of the superior wireless router: Click Wireless Settings Wireless Bridge Mode Select: WISP Mode Click Scan to select the SSID of the superior wireless router Click OK to connect. Set the same security mode, WPA encryption rules, and keys as the superior router.

腾达W3002R路由器WISP参数设置

Step 3: Check whether the WISP configuration was successful

Click Advanced Settings Running Status to check the connection status; if it appears as connected, it means that the WISP function configuration on the Tengda W3002R wireless router has been successful.

腾达W3002R路由器WISP连接状态

Related articles:

1. Internet settings for Tengda W3002R wireless router 

2. Tenda W3002R wireless router WDS bridge settings 

3、Tenda’s wireless router cannot be connected to the Internet after setting up

4、Tenda router limits WiFi speed 

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注