Tenda FH1202 Wall King Wireless King router settings
This article introduces the installation of the Tenda Tengda FH1202 Wall King Wireless King router and the ADSL Internet access settings. The FH1202 is designed by Tengda to meet the needs of large-sized families, cafes, teahouses and other business leisure needs.The 11ac Wall King dual-band Gigabit wireless router was designed for regional Internet access needs. It uses 5 external high-gain 5dBi antennas, based on signal amplification technology and MIMO wireless multiplexing technology, and provides wireless communication.The penetration and transmission distance of the signal have been significantly improved, which can fully meet the current wireless coverage of duplex, loft units and villas.
A brand-new Tengda FH1202 Wall King Wireless King router needs to be configured in the following four aspects to realize shared Internet access for computers, mobile phones, tablets and other terminals:1. FH1202 routingInstall the computer;2. Configure the computer IP;3. Configure the FH1202 router;4. Check whether the configuration is successful。
Step 1: Install the FH1202 router
1. Internet access through telephone line:please prepare2 piecesShorter network cable, one network cable is used to connect ADSL Modem(Cat) and Tengda FH1202 routerWANInterface; another network cable is used to connect to TengdaAny LAN(1/2/3/4) interface and computer on the FH1202 router.
2. Optical diamond access:please prepare2 piecesNetwork cable. One network cable is used to connect Guangmao to the Tengda FH1202 routerWANInterface; another network cable is used to connect any network cable on the Tengda FH1202 routerA LAN(1/2/3/4) interface to the computer.
3. Internet access to the home through the Internet cable:please prepare1 pieceNetwork cable, first plug in the home network cable provided by the broadband carrier into the network cable of the Tengda FH1202 router.WANInterface; then connect the network cable you have prepared at one endThe other end of the computer is connected to any LAN(1/2/3/4) interface on the Tengda FH1202 router.
Friendly reminder:Users should install the FH1202 router according to the Internet environment of their own place.
Step 2: Configure the computer IP
Friendly note: Whether you configure the Tengda FH1202 router now or connect the computer to the Tengda FH1202 router to access the Internet after the configuration is completed, you need to configure the IP address of the computer toautomatic acquisitionGet (dynamic IP); This article takes the Windows 7 system as an example to introduce it. Windows XP/8 users please read the article: How to Set a Dynamic IP Address of a Computer.
1. Right-click on Internet Neighbor and click on Properties”
2. Right-click on local connection and click on properties”
3. Double click on Internet Protocol (TCP/IP)”
3. Select Automatically obtaining IP addresses and Automatically obtaining DNS server addresses and click OK.
Step 3: Configure the FH1202 router
1. Enter 192.168.0.1 in the browser and press the Enter button to access the Internet: ADSL enter the broadband username and password provided by the broadband operator to set up the wireless password and click Save.(If 192.168.0.1 cannot be opened, please read the article:Solution to the Tenda wireless router 192.168.0.1 that cannot be opened)
PS: The default login password of Tengda FH1202 router is blank. After entering 192.168.0.1 in the browser, it will automatically jump to the settings interface.
Step 4: Check whether the configuration was successful
1. Click Advanced Settings”
2. Running status WAN port status Check the status of the WAN port on the right: Access information, if displayed asconnected, represents Tengda FH1202 wireless routerThe configuration is successful, and you can surf the Internet normally; if it shows that it is not connected or is connecting, please carefully check your configuration steps and strictly follow the method described in this article to configure step by step.
At this point, we have completed the installation of the Tenda Tengda FH1202 Wall King Wireless King router and the ADSL Internet access settings. Now users can use the Internet on their mobile phones, computers, tablets and other devices.Connect to the FH1202 router online or wirelessly and share the same broadband line to access the Internet.
Related articles:
1、Tenda’s wireless router cannot be connected to the Internet after setting up
2、Tenda router limits WiFi speed