Tenda FH304 wireless router settings

This article introduces the installation and Internet access settings of Tenda Tengda FH304 wireless router. The FH304 is a 300M wireless enhanced router designed to meet large-area wireless shared Internet access.Using Tengda’s latest antenna core technology, three external 5dbi high-gain omnidirectional antennas will bring you greater wireless coverage and meet the wireless coverage needs of large-sized families such as towers and villas.

腾达FH304无线路由器

To achieve shared Internet access, a newly purchased Tengda FH304 wireless router requires the following 4 configuration steps:1. Install FH304 router;2. Configure computer IP;3. Configure FH304 channels4. Check whether the configuration was successful

Step 1: Install the FH304 router

1. Internet access through telephone line:Please prepare 2 shorter network cables, one network cable is used to connect the ADSL Modem(Cat) and the Tengda FH304 router.WANInterface; another network cable is used to connect to TengdaAny LAN(1/2/3/4) interface on the FH304 router and computer.

电话线上网时腾达FH304安装

2. Optical fiber Internet access: Please prepare 2 network cables, one network cable will be used to connect Guangmao to the Tengda FH304 routerWANInterface; another network cable is used to connect to any one on the Tengda FH304 routerLAN(1/2/3/4) interfaces and computers.

光钎上网时路由器的安装方法

3. Internet access to the home through the Internet cable:Please prepare a network cable, and first plug the home network cable provided by the broadband carrier into the network of the Tengda FH304 router.WANInterface; then connect the network cable you have prepared and connect it to the meter at one endThe other end of the computer is connected to any LAN(1/2/3/4) interface on the Tengda FH304 router.

网线入户上网时腾达FH304路由器安装

Step 2: Configure the computer IP

To configure an FH304 router or connect to an FH304 router to access the Internet, you need to configure the IP address on your computer toDynamic IP address (automatically obtained)This article takes Windows XP computers as an exampleIntroduction, Windows 7/8 users please read the article: How to set dynamic IP addresses for your computer.

1. Right-click on Internet Neighbor and click on Properties”

XP网上邻居属性

2. Right-click on local connection and click on properties”

XP电脑本地连接属性

3. Double click on Internet Protocol (TCP/IP)”

xp系统下本地连接属性中选择tcp/ip

3. Select Automatically obtaining IP addresses and Automatically obtaining DNS server addresses and click OK.

xp系统下设置自动获取ip地址

Step 3: Configure the FH304 router

1. Log in to the FH304 router setting interface: Run the browser on your computer, enter: 192.168.0.1 in the browser’s address bar, press Enter, and enter the password in the pop-up dialogue box:admin——>Click OK.(If 192.168.0.1 cannot be opened, please read the article:Solution to the Tenda wireless router 192.168.0.1 that cannot be opened

腾达FH304路由器登录设置界面

2. Select ADSL for Internet access and enter the broadband username and broadband password provided by the broadband operator to set up the wireless password and click OK.

腾达FH304路由器上网设置

Step 4: Check whether the configuration was successful

Click Advanced Settings running status to check the WAN port status. If it displays:connected, indicating that the Tengda HF304 wireless router has been successfully configured to access the Internet and can operate normallyInternet access; if the WAN port status showsnot connected, indicating that there is a problem with the configuration. Please carefully check the relevant configuration steps.

腾达FH304路由器WAN口状态

Related articles:

1、Tenda’s wireless router cannot be connected to the Internet after setting up

2、Tenda router limits WiFi speed 

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注