How to set up a Tenda 8002R wireless router

This article introduces the installation and Internet setting method of the Tenda 8002R wireless router. To achieve shared Internet access, a brand new Tenda 8002R wireless router needs to go through the following four configurations.Setting steps:1. Install the 8002R router;2. Configure the computer IP;3. Set up the 8002R router;4. Check whether the configuration is successful

腾达8002R无线路由器

Step 1: Install the 8002R router

1. Internet access through telephone line:please prepare2 piecesShorter network cable, one network cable is used to connect the ADSL Modem(Cat) and the Tengda 8002R routerWANInterface; another network cable is used to connect to TengdaAny LAN(1/2/3/4) interface and computer on the 8002R router.

电话线上网时腾达8002R路由器安装

2. Optical diamond access:please prepare2 piecesNetwork cable. One network cable is used to connect Guangmao to the Tengda 8002R routerWANInterface; another network cable is used to connect to any one on the Tengda 8002R routerLAN(1/2/3/4) interfaces and computers.

光钎上网时路由器的安装方法

3. Internet access to the home through the Internet cable: Please prepare1 pieceNetwork cable, first connect the broadband carrier providedHousehold network cable (also the network cable connected from the wall)Plug into the Tengda 8002R routerWANInterface; then connect the network cable you have prepared and connect it to the meter at one endThe other end of the computer is connected to any LAN(1/2/3/4) interface on the Tengda 8002R router.

网线入户上网时腾达8002R路由器安装

Step 2: Configure the computer IP

warm reminder: When setting up the Tengda 8002R router, or connecting to the Tengda 8002R router to access the Internet in the future, you need to configure the IP address of the computer toAutomatic acquisition (dynamic IP); use belowFor example, Windows XP computers are introduced. If users are using Windows 7/8 computers, please read the article: How to Set Dynamic IP Address of Computer.

1. Right-click on Internet Neighbor and click on Properties”

XP网上邻居属性

2. Right-click on local connection and click on properties”

XP电脑本地连接属性

3. Double click on Internet Protocol (TCP/IP)”

xp系统下本地连接属性中选择tcp/ip

3. Select Automatically obtaining IP addresses and Automatically obtaining DNS server addresses and click OK.

xp系统下设置自动获取ip地址

Step 3: Set up the 8002R router

1. Log in to the 8002R router setting interface: Run the browser on your computer, enter 192.168.0.1 in the browser’s address bar and press Enter to enter the default login password:admin——>Click OK.(If 192.168.0.1 cannot be opened, please read the article:Solution to the Tenda wireless router 192.168.0.1 that cannot be opened

登录腾达8002R路由器的设置界面

Note:If the login password is modified, you need to enter the modified login password to log in.

2. Set up an 8002R router to access the Internet: Currently, broadband operators providePPPoE(ADSL) Dial-upStatic (fixed) IPDynamic (automatic acquisition)IP this3Different ways to surf the Internet, the following will beMake an introduction.

PPPoE(ADSL) dial-up Internet settings

PPPoE(ADSL) dial-up: Broadband operators provide aBroadband usernameandbroadband passwordTo the user; when not using a router, the user needs to access the router through the“broadband connection”toDial-up access.

(1) Select ADSL for Internet access and enter the broadband username and broadband password provided by the broadband operator to set up the wireless password and click OK.

腾达8002R路由器上设置ADSL上网

Static (fixed) IP Internet access settings

Static (fixed) IP: Broadband operators provideIP address, subnet mask, default gateway, DNS serverThe address is given to the user. When a router is not used, the user needs to operate according to broadband.Use the IP address information provided by the provider to set the IP address in the local connection.

(1) Click Advanced Settings”

进入腾达8002R路由器的高级设置界面

(2) Click Advanced Settings WAN port setting mode to select: static IP and fill in IP address, subnet mask, gateway, DNSClick OK for the address.

腾达8002R路由器上设置静态IP上网

(3) Click Advanced Settings MAC Clone Clone MAC address to determine.

腾达8002R路由器上进行MAC地址克隆

Dynamic (automatic acquisition) IP Internet settings

Dynamic (automatic acquisition) IP: The broadband operator provides a network cable to the user’s home. When the router is not in use, plug this network cable into the computer to access the Internet without any other configuration.

(1) Selection of Internet access method: Automatically obtain and set wireless password and click OK.

腾达8002R路由器上设置自动获取上网

(2) Click Advanced Settings MAC Clone Clone MAC address to determine.

腾达8002R路由器上进行MAC地址克隆

Step 4: Check whether the settings were successful

(1) Click Advanced Settings Operation Status to view the connection status under the WAN port status. If it displays:connected, explaining the characteristics of the Tengda 8002R routerInstallation and Internet settings were successful.

腾达8002R路由器WAN口状态

Note:if the displaynot connected, indicating that the configuration was unsuccessful. Please carefully check the relevant configuration steps and strictly follow the methods described in this article.

Related articles:

1、Tenda’s wireless router cannot be connected to the Internet after setting up

2、Tenda router limits WiFi speed 

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注