How to set up a Tenda 837R wireless router

This article introduces the installation, Internet settings and wireless network settings of the Tenda 837R wireless router. A brand-new Tenda 837R wireless router needs to realize the function of shared Internet access, needs to be configured in the following five aspects:1. Install the 837R router;2. Configure the computer IP;3. Internet settings;4. Wireless network settings;5. Check whether the settings are successful

Tenda-837R无线路由器

Step 1: Install the 837R router

1. Access the Internet through the telephone line: Please prepare2 piecesShorter network cable, one network cable is used to connectADSL Modem(Cat)With the Tengda 837R routerWANInterface; another network cable is used to connect to the Tengda 837RAny LAN(1/2/3/4) interface on the router and the computer.

电话线上网时腾达837R路由器安装

2. Optical diamond access:please prepare2 piecesNetwork cable, one network cable is used to connectlight catWith the Tengda 837R routerWANInterface; another network cable is used to connect to any one on the Tengda 837R routerLAN(1/2/3/4) interface and computer.

光钎上网时路由器的安装方法

3. Internet access to the home through the Internet cable: Please prepare1 pieceNetwork cable, first connect the broadband carrier providedHousehold network cablePlugged into the Tengda 837R routerWANInterface; then connect the network cable you have prepared and connect it to the meter at one endThe other end of the computer is connected to any LAN(1/2/3/4) interface on the Tengda 837R router.

网线入户上网时腾达837R路由器安装

Note:After the installation of the 837R wireless router is completed, the SYS indicator light will flash under normal circumstances, the WAN interface will always be on or flashing, and the port connected to the computer in 1/2/3/4 ports will always be on or flashing.If the corresponding indicator light is not on or flashes, please check whether the interface is connected correctly and whether there is a problem with the network cable.

Step 2: Configure the computer IP

1. Right-click on Internet Neighbor and click on Properties”

XP网上邻居属性

2. Right-click on local connection and click on properties”

XP电脑本地连接属性

3. Double click on Internet Protocol (TCP/IP)”

xp系统下本地连接属性中选择tcp/ip

3. Select Automatically obtaining IP addresses and Automatically obtaining DNS server addresses and click OK.

xp系统下设置自动获取ip地址

For users of Windows 7/8 computers, please click to read the article:Method for setting dynamic IP address of computer

Step 3: Internet settings

1. Enter: 192.168.0.1 in the browser and press the Enter key to enter the default password in the dialog box: admin Click OK.(If 192.168.0.1 cannot be opened, please read the article:Solution to the Tenda wireless router 192.168.0.1 that cannot be opened

腾达837R路由器登录设置界面

2. Selection of Internet access method: ADSL dial-up and enter the broadband username and broadband password provided by the broadband operator and click OK.

腾达837R路由器上进行上网设置

Step 4: Wireless network settings

1. Click Advanced Settings”

进入腾达837R路由器高级设置界面

2. Click Wireless Settings Wireless Basic Settings and check the Enable Wireless Function to set the SSID. The SSID is the name of the wireless network. Do not use Chinese characters——>“Broadcast (SSID) selection: Open and click OK.

腾达837R路由器上的无线基本设置

3. Click Wireless Settings Wireless Security WPS Settings Select: Disable Security Mode Select: WPA-PSK WPA Encryption Rules Select:The AES setting key is the wireless connection password and click OK.

腾达837R路由器上的无线安全设置

Step 5: Check whether the settings were successful

Click Advanced Settings System Status to check the status of the WAN port. If it shows that it is connected, it means that the Tengda 837R wireless router has been successfully set up and you can surf the Internet normally; If it displays: Not connected or in progress, please verify and check the relevant setting steps.

腾达837R路由器的WAN口连接状态

Related articles:

1、Tenda’s wireless router cannot be connected to the Internet after setting up

2、Tenda router limits WiFi speed 

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注