How to set up a Tenda N300 V2 wireless router

This article introduces the installation, Internet settings, and wireless WiFi settings of the Tenda N300 V2 wireless router. If you want to realize the functions of shared wired and wireless Internet access for a newly purchased Tenda N300 wireless router, you need to perform the following setting steps:1. Install the N300 router;2. Set the computer IP;3. Set the N300 router to access the Internet;4. Set the N300 router to wireless WiFi;5. Check whether the setting is successful

腾达N300无线路由器

Step 1: Install the N300 router

1. Access the Internet through the telephone line: Need to prepare2 piecesShorter network cable, one network cable is used to connectADSL Modem(Cat)With the Tengda N300 routerWANInterface; Another network cable is used to connect any LAN(1/2/3/4) interface on the Tengda N300 router to the computer used for setting up.

电话线上网时腾达N300路由器安装

2. Optical diamond access:please prepare2 piecesNetwork cable, one network cable is used to connectlight catWith the Tengda N300 routerWANInterface; Another network cable is used to connect any LAN(1/2/3/4) interface on the Tengda N300 router to the network cable interface on the computer.

光钎上网时路由器的安装方法

3. Internet access to the home through the Internet cable: Please prepare1 pieceNetwork cable, first connect the broadband carrier providedHousehold network cablePlug into the Tengda N300 routerWANInterface; Then connect one end of the network cable you prepared to the computer, and the other end to any LAN(1/2/3/4) interface on the Tengda N300 router.

网线入户上网时腾达N300路由器安装

Tips:After the Tengda N300 wireless router is successfully installed, the SYS indicator light will flash, the WAN interface will always be on or flashing, and the port connected to the computer in port 1/2/3/4 will always be on or flashing.

Step 2: Configure the computer IP

1. Right-click on Internet Neighbor and click on Properties”

XP网上邻居属性

2. Right-click on local connection and click on properties”

XP电脑本地连接属性

3. Double click on Internet Protocol (TCP/IP)”

xp系统下本地连接属性中选择tcp/ip

3. Select Automatically obtaining IP addresses and Automatically obtaining DNS server addresses and click OK.

xp系统下设置自动获取ip地址

Windows 7/8 computer users please click to read the article:Method for setting dynamic IP address of computer

Step 3: Internet settings for the N300 router

1. Run the browser on your computer, enter in the browser address bar: 192.168.0.1 Press the Enter key to enter the default login password in the page you jump to: admin Click OK.(If 192.168.0.1 cannot be opened, please read the article:Solution to the Tenda wireless router 192.168.0.1 that cannot be opened

腾达N300路由器登录设置界面

2. Selection of Internet access method: ADSL dial-up and enter broadband account number and password confirmation.

腾达N300路由器上网设置

Step 4: N300 router wireless WiFi settings

 1. Click Advanced Settings”

进入腾达N300路由器的高级设置界面

2. Click Wireless Settings Wireless Basic Settings to check Enable Wireless Function to set the SSID. The SSID is the name of the wireless network. Chinese characters cannot be used. Wireless working mode selection: Wireless Access Point (AP) network mode selection: 11b/g/n Mixed Mode Broadcast (SSID) selection: Enable and click OK.

腾达N300路由器上无线基本设置

3. Click Wireless Settings Wireless Security WPS Settings Selection: Disable Security Mode Selection: WPA-PSK WPA Encryption Rules Selection: AES Set Password, the password here is the wireless WiFi connection password, and click OK at least 8 digits.

腾达N300路由器上无线安全设置

Step 5: Check whether the settings were successful

Click Advanced Settings Operation Status to view the WAN port status. If it displays:connected, you can surf the Internet normally; if it shows: Not connected or in progress, please carefully check the relevant setting steps.

腾达N300路由器上WAN接口连接状态

At this point, we have completed the installation, Internet settings, and wireless WiFi settings of the Tenda N300 V2 wireless router; multiple computers, mobile phones and other devices of users can share the Internet through the N300 wireless router.

Related articles:

1、Tenda N300 wireless router ADSL Internet settings

2、Tenda N300 wireless router automatically obtains IP Internet settings

3、Fixed IP Internet access settings for Tenda N300 wireless router

4. Tenda N300 router changes the wireless WiFi name and password

5. Tenda N300 router limits network speed settings 

6、Tenda’s wireless router cannot be connected to the Internet after setting up

7、Tenda router limits WiFi speed 

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注