How to set up a Tenda N3 wireless router

This article introduces the installation, Internet access and wireless WiFi settings of Tenda N3 wireless router; the installation and setting steps of a brand new Tenda N3 wireless router are as follows:1. N3 routingDevice installation;2. Set the computer IP;3. N3 router Internet settings;4. N3 router wireless WiFi settings;5. Check whether the settings are successful

腾达N3无线路由器

Step 1: Install the N3 router

1. Internet access through telephone line:need to prepare2 piecesShorter network cable, one network cable is used to connect to the Tengda N3 routerWANinterface andADSL Modem(Cat); Another network cable is used to connect to the Tengda N3 routerAny one onLAN(1/2/3/4)Interface and thecomputer

电话线上网时路由器的安装方法

2. Optical diamond access:please prepare2 piecesNetwork cable. One network cable is used to connect to the Tengda N3 routerWANinterface andlight cat; Another network cable is used to connect to any one on the Tengda N3 routerLAN(1/2/3/4)pickport andcomputerThe network cable interface on the.

光钎上网时路由器的安装方法

3. Internet access to the home through the Internet cable:please prepare1 pieceNetwork cable, first connect the broadband carrier providedHousehold network cablePlugged into the Tengda N3 wireless routerWANInterface; then connect the network cable you have prepared at one endmetercomputers, the other end is connected toTengda N3on the routerAny LAN(1/2/3/4)Interface.

网线入户上网时路由器的安装方法

warm reminder: Internet cable to the home refers to the broadband operator providing a network cable to the user’s home. The network cable pulled out from the wall is also considered this access method.

Step 2: Configure the computer IP

Windows 7/8 users please click to read the article:Method for setting dynamic IP address of computer

1. Right-click on Internet Neighbor and click on Properties”

XP网上邻居属性

2. Right-click on local connection and click on properties”

XP电脑本地连接属性

3. Double click on Internet Protocol (TCP/IP)”

xp系统下本地连接属性中选择tcp/ip

3. Select Automatically obtaining IP addresses and Automatically obtaining DNS server addresses and click OK.

xp系统下设置自动获取ip地址

Step 3: N3 router Internet settings

1. Run the browser on your computer, enter: 192.168.0.1 in the browser address bar and press Enter to enter the default login password in the page you jump to: admin——>Click OK.(If 192.168.0.1 cannot be opened, please read the article:Solution to the Tenda wireless router 192.168.0.1 that cannot be opened

登录到腾达N3路由器设置界面

2. Selection of Internet access method: ADSL dial-up and enter the broadband account number and broadband password obtained when handling broadband services and click OK.

腾达N3路由器上网设置

Step 4: N3 router wireless WiFi settings

1. Click Advanced Settings”

进入腾达N3路由器的高级设置界面

2. Click Wireless Settings Wireless Basic Settings and check to enable wireless function Wireless working mode selection: Wireless Access Point (AP) Network ModeType selection: 11b/g/n mixed mode sets the SSID, which is the name of the wireless network. It is recommended to use a combination of letters and numbers,Chinese characters cannot be used——>“broadcast(SSID) Select: Open and click OK.

腾达N3路由器上的无线基本设置

3. Click Wireless Settings Wireless Security WPS Settings Select: Disable Security Mode Select: WPA-PSK WPA Encryption Rules Select:AES setting key, the password here is the wireless WiFi connection password, at least 8 digits click to confirm.

腾达N3路由器上的无线高级设置

Step 5: Check whether the settings were successful

Click Advanced Settings Status to view the WAN port status. If it displays:connected, and you get the IP address, you can access the Internet normally; if you displayDisplay: Not connected or in progress, and IP, gateway, DNS and other parameters all display 0. Please verify and check the relevant setting steps.Or read the article:Tenda Tengda wireless router cannot be connected to the Internet after setting up

腾达N3路由器上WAN口连接状态

At this point, we have completed the installation, Internet settings and wireless WiFi settings of Tenda N3 wireless routing; users ‘computers, mobile phones and other devices can be connected using network cables or wireless channels.Connect to the Tengda N3 router to access the Internet. Note: After the computer is connected to the N3 router, you can access the Internet directly, and you don’t have to go through the Internet again.“broadband connection”Come online.

Related articles:

1、Tenda’s wireless router cannot be connected to the Internet after setting up

2、Tenda router limits WiFi speed 

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注