Tenda D151/D154 all-in-one routing cat mode settings
This article introduces the installation of the Tenda D154 router and the setting method of routing cat mode. Routing cat mode means that the Tenda D154 has both an ADSL Modem and a wireless router. In this mode, the Tengda D154 router all-in-one machine is both an ADSL Modem and a wireless router; users no longer need an additional ADSL Modem, so they can implement it.Now ADSL Internet access.
Step 1: Install the D154 all-in-one machine
1. Users need to prepare1 pieceNetwork cable, first plug the telephone cable into the DSL interface (blue) of the D154 all-in-one machine, and then connect the prepared network cable to the computer at one end and connect the other end to the D154 all-in-one machine.For any of the interfaces in 2/3/4 on, please refer to the following figure for specific connection methods:
Note:The normal working state of the D154 router is that the indicator light SYS flashes, the WAN port is always on or flashes, and the port connected to the computer in any interface 2/3/4 is always on or flashes.
Step 2: Set the computer IP
Windows 7/8 users please click to read the article: How to set dynamic IP addresses on your computer.
1. Right-click on Internet Neighbor and click on Properties”
2. Right-click on the local connection and click on Properties”
3. Select Internet Protocol (TCP/IP), click Properties or double click
4. Select Automatically obtaining IP addresses and Automatically obtaining DNS server addresses and click OK.
Step 3: Set up the D154 all-in-one machine to access the Internet
1. Run the browser on your computer, enter: 192.168.1.1 in the browser’s address bar and press Enter: username: admin, password:admin Click to log in.
2. Check to enable PVC search and click PVC search. After the search is successful, continue to choose Internet connection type (Internet access method): PPPoE input broadband transportThe security key for the broadband account number and broadband password settings provided by the merchant is the connection password of the wireless network. Click to confirm.
warm reminder: When setting up Internet access, you need to click Search PVC when the phone line is connected normally. After the search is successful, enter the account number and password
Step 4: Check whether the settings were successful
Click on the device information WAN IPV4 address,If you get the IP of the public network, means that you can go online:
If there is no IP address information below the IPV4 address, the setting was unsuccessful. Please verify and check the relevant setting steps.
Related articles:
1、Tenda’s wireless router cannot be connected to the Internet after setting up
2、Tenda router limits WiFi speed