Tenda F1200 11AC dual-band wireless router settings
This article introduces the installation, Internet settings and wireless WiFi settings of the Tenda F1200 11AC dual-band wireless router. A newly purchased Tenda F1200 11AC dual-band wireless routerTo complete Internet settings and wireless settings, the following steps are needed:1. Install the Tengda F1200 router;2. Set the computer IP;3. Set the Internet access of the F1200 router;4.F1200 wireless WiFi settings;5. Check whether the settings were successful。
Step 1: Install the Tengda F1200 router
1. Internet access through telephone line:need to prepare2 piecesShorter network cable, one network cable is used to connect to the Tengda F1200 routerWANinterface andADSL Modem(Cat); Another network cable is used to connectTengda F1200routerAny one onLAN(1/2/3/4)Interface and thecomputer。
2. Optical diamond access:please prepare2 piecesNetwork cable, one network cable is used to connectTengda F1200router’sWANinterface andlight cat; Another network cable is used to connectTengda F1200Any one on the routerLAN(1/2/3/4)pickport andcomputerThe network cable interface on the.
3. Internet access to the home through the Internet cable:please prepare1 pieceNetwork cable, first connect the broadband carrier providedHousehold network cableinserted inTengda F1200wireless routerWANInterface; then connect the network cable you have prepared at one endmetercomputers, the other end is connected toTengda F1200on the routerAny LAN(1/2/3/4)Interface.
Step 3: Set the computer IP
This article takes Windows XP computers as an example to introduce them. Windows 7/8 users please click to read the article:Method for setting dynamic IP address of computer。
1. Right-click on the Internet Neighbor on the desktop and click on Properties.
2. Right-click on local connection and click on properties”
3. Double click on Internet Protocol (TCP/IP)”
3. Select Automatically obtaining IP addresses and Automatically obtaining DNS server addresses and click OK.
Step 3: Internet settings for the F1200 router
1. Enter 192.168.0.1 in the browser and press the Enter button to access the Internet: ADSL enter the broadband username and password provided by the broadband operator to set up the wireless password and click Save.(If 192.168.0.1 cannot be opened, please read the article:Solution to the Tenda wireless router 192.168.0.1 that cannot be opened)
PS:The default login password of Tengda F1200 router is blank. After entering 192.168.0.1 in the browser, it will automatically jump to the settings interface.
Step 4: F1200 wireless WiFi settings
1. Click Advanced Settings”
2. Click Wireless Settings Basic Settings Wireless frequency band selection: 2.4GHz 2.4GHz wireless network selection: Enable SSID broadcast selection: Enable setting wireless signal name and click Save.
3. Click Wireless Settings Security Settings Wireless frequency band selection: 2.4GHz Select wireless signal name Select WPA-PSK/WPA2-PSK”——>“Authentication type selection: WPA-PSK encryption method selection: AES sets the PSK password, the PSK password is the password of the wireless network click to save”。
Step 5: Check whether the configuration was successful
1. Running status View the WAN port status on the right“WAN port status”Below: Access information, if displayed asconnected, means that the Tengda F1200 wireless router is equipped withIf the installation is successful, you can surf the Internet normally; if it shows that it is not connected or is in progress, please check your configuration steps carefully.
Related articles:
1、Tenda’s wireless router cannot be connected to the Internet after setting up
2、Tenda router limits WiFi speed