How to set up a Tenda T845 router
This article introduces the installation and Internet settings of the Tenda T845 wireless router. The setting method described in this article is suitable for users who need to access the Internet through a broadband connection on their computers when they are not using the router, which is suitable for ADSL dial-up Internet users.
Step 1: Install the Tengda T845 router
1. Access the Internet through the telephone line: Please prepare2 piecesShorter network cable, one network cable is used to connect ADSL Modem(Cat) and Tengda T845 routerWANInterface; another network cable is used to connect any LAN(1/2/3/4) interface on the Tengda T845 router to a computer.
2. Optical fiber Internet access: Please prepare 2 network cables. One network cable is used to connect Guangmao to the WAN interface of the Tengda T845 router; the other network cable is used to connect any LAN(1/2/3/4) interface and computer on the Tengda T845 router.
3. Internet access to the home through the Internet cable: Please prepare a network cable. First plug the home network cable provided by the broadband carrier into the WAN interface of the Tengda T845 router; then connect one end of the network cable you have prepared to the computer and the other end to any LAN(1/2/3/4) interface on the Tengda T845 router.
Step 2: Set your computer IP address
Before setting up the Tenda T845 router, you need to set the IP address of your computer toautomatic acquisition, as shown in the following figure: . If you don’t know how to set it, please read the article: Computer Dynamics (Automatic Acquisition)IP Address Setting Method
Step 3: Setting up the T845 router
1. Internet settings for T845 router
Enter: 192.168.0.1 in the address bar of the browser and press the Enter button to select ADSL dialing on the jump page and enter the broadband username and broadband password provided by the broadband operator. Click OK.(If 192.168.0.1 cannot be opened, please read the article:Solution to the Tenda wireless router 192.168.0.1 that cannot be opened)
2. Click Advanced Settings running status to check the connection status. If the display is: Connected, it means that the Tenda T845 router has completed Internet settings.
Warm reminder:
After the Tenda T845 router completes Internet access settings, computers connected to the T845 router can automatically access the Internet, and there is no need to dial up the Internet through a broadband connection. If there are other computers that need to access the Internet, directly connect the computer to any idle interface of router 123, change the local connection to automatically obtain IP, and there is no need to configure the router.
Related articles:
1. Tenda wireless router cannot be connected to the Internet after setting up
2. Tenda T845 router automatic acquisition (DPCH)IP Internet access settings
3. Fixed (static)IP Internet access settings for Tenda T845 router
4. Set the wireless network name and password on the Tenda T845 router
5. WDS wireless bridge settings for Tenda T845 router
6. Cliet+AP mode settings for Tenda T845 router
7. Tenda T845 router WISP(wireless WAN) settings
8、Tenda router limits WiFi speed