How to set up the Tenda NH316 router

This article introduces the installation and Internet setting method of the Tenda NH316 router; a brand new Tenda NH316 router needs the following three setting steps to access the Internet:1. Install the Tengda NH316 router;2. Set the computer IP address;3. Set the Internet access of the Tengda NH316 router

warm reminder: The method described in this article is suitable for ADSL dial-up Internet users, that is, when you are not using a router, you need to use it on your computer.“broadband connection”Users who come to dial up the Internet.

腾达NH316无线路由器

Step 1: Install Tengda NH316 router

1. Access the Internet through the telephone line: Please prepare2 piecesShorter network cable, one network cable is used to connectADSL Modem(Cat)With the Tengda NH316 routerWANInterface; another network cable is used to connect to any one on the Tengda NH316 routerLAN(1/2/3)interface andcomputer

电话线上网时路由器的安装方法

2. Optical fiber Internet access: Please prepare2 piecesNetwork cable, one network cable is used to connectlight catWith the Tengda NH316 routerWANInterface; another network cable is used to connect to any one on the Tengda NH316 routerLAN(1/2/3)interface andcomputer

光钎上网时路由器的安装方法

3. Internet access to the home through the Internet cable: Please prepare1 pieceNetwork cable, first connect the broadband carrier providedHousehold network cablePlugged into the Tengda NH316 routerWANInterface; then connect the network cable you have prepared at one endcomputer, and the other end is connected to any one on the Tengda NH316 routerLAN(1/2/3)Interface.

网线入户上网时路由器的安装方法

Step 2: Set your computer IP address

Before setting up the Tengda NH316 router to access the Internet, you need to first set the IP address of your computer toAutomatic (dynamic)IP acquisition, as shown in the following figure. If you don’t know how to set it, please click to read the article: Computer Dynamics (Automatic Acquisition)IP Address Setting Method.

电脑IP地址设置为自动获取

Step 3: Internet settings on Tengda NH316 router

Enter in the browser: 192.168.0.1 Press the Enter key and select ADSL dialing in the page to be jumped to fill in the broadband username, broadband password, wireless signal name, and wireless password provided by the broadband operator and click OK.(If 192.168.0.1 cannot be opened, please read the article:Solution to the Tenda wireless router 192.168.0.1 that cannot be opened

腾达NH316路由器ADSL上网设置

Questions to note:

1. Please use letters and numbers for wireless signal names, not Chinese, because some wireless devices cannot recognize the wireless wifi name in Chinese.

2. Please use a combination of letters, numbers, and case for wireless passwords, and the length is greater than 8 digits; the more complex the password, the more secure the wireless network will be.

3. After completing the appeal settings, the computer connected to the Tengda NH316 router can automatically access the Internet; users no longer need to dial up the Internet through a broadband connection. If there are other computers that need to access the Internet, you can access the Internet by directly connecting the computer to any idle interfaces of routers LAN1, LAN2, and LAN3.

Related articles:

1. Tenda wireless router cannot be connected to the Internet after setting up

2、Tenda router limits WiFi speed

3. Dynamic IP(DHCP) Internet settings for Tenda NH316 router

4. Fixed (static)IP Internet access settings for Tenda NH316 router

5. Tenda NH316 router speed control settings

6. Hotspot Signal Amplification (WISP) settings for Tenda NH316 router   

 

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注