Tenda W316R router automatically obtains IP Internet settings

This article introduces the Tenda W316R router, which automatically obtains the setting method for IP Internet access; if your broadband Internet access type is ADSL(PPPOE) dial-up and fixed IP address Internet access, please click on the relevant article section at the end of this article to read the corresponding setting tutorial.

腾达W316R无线路由器
Tengda W316R wireless router

How to determine whether the broadband type is to automatically obtain IP access?

Method 1: Check the list of the broadband service you have handled, which will contain the broadband type; or consult the broadband operator’s customer service by phone and ask the customer service staff to tell you.

Method 2:Judgment based on the characteristics of automatically acquired IP broadband type

After automatically obtaining broadband services, the broadband operator will provide a network cable to the user’s home; when the router is not used, you need to set the IP address of the computer to automatic acquisition (dynamic IP), and then plug the network cable provided by the broadband operator into the computer, and the computer can access the Internet. This is the case where broadband types are automatically acquired.

Step 1: Install the Tengda W316R router

Connect the network cable provided by the broadband carrier to the WAN port (blue) of the Tengda W316R router; prepare another network cable, connect one end to the computer, and the other end to any of the 1, 2, 3, and 4(yellow ports) on the Tengda W316R router; the specific installation is as shown in the following figure:

腾达(Tenda)W316R路由器安装
Tenda W316R router installation

Questions to note:

The normal working state of the Tengda W316R router is that the indicator light SYS flashes, the WAN port is always on or flashing, and the port connected to the computer in the 1/2/3 port is always on or flashing.

Step 2: Set your computer IP address

Before setting up the Tengda W316R wireless router, you need to first set the computer IP address to automatic acquisition (dynamic IP), as shown in the following figure. If you don’t know how to set it, please click to read the article: How to set a computer dynamic IP address.

电脑IP地址设置为自动获取
Computer IP address is set to be obtained automatically

Step 3: Tengda W316R automatically obtains IP Internet settings

1. Enter: 192.168.0.1 in the browser’s address bar and press the Enter button-enter the default login password in the jump page: admin-click “OK”. (If 192.168.0.1 cannot be opened, please read the article:Solution to the Tenda wireless router 192.168.0.1 that cannot be opened)

腾达W316R路由器登录界面
Tengda W316R router login interface

2. Select “Automatic Acquisition” on the jump page–set the password for “Wireless Encryption”–click “OK”.

腾达W316R路由器设置自动获取IP上网
Tengda W316R router is set to automatically obtain IP access

Step 4: Check whether the settings were successful

1. Click “Advanced Settings”

进入腾达W316R路由器的高级设置界面
Enter the advanced settings interface of the Tengda W316R router

2. Click “Advanced Settings”-“System Status”-to view “Connection Status”. If it displays: Connected, it means that the automatic acquisition of IP address for Internet access on the Tengda W316R router has been successfully set.

检查腾达W316R路由器设置是否成功
Check whether the Tengda W316R router is set up successfully

Related articles:

1. Tenda wireless router cannot be connected to the Internet after setting up

2. How to check if there is anyone surfing the Internet on the Tengda wireless router?

3、Tenda wireless router anti-rubbing network settings

4、Tenda router limits WiFi speed

5. ADSL Internet settings for Tenda W316R wireless router

6. Fixed (static)IP Internet access settings for Tenda W316R router

Post a reply

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注